0

Aspire Nautilus 2

£19.99

Earn20 reward points

Quantity

Choose Strength

The Aspire Nautilus 2 tank is an update to the popular Nautilus and Nautilus Mini - with enhanced performance and ease of use. The main enhancements are flavour production, durability, airflow control, ease of filling and sub-ohm capability

The kit includes the assembled tank, two coils (one pre-installed) and accessories including a spare glass tube and alternative mouthpiece.

Guide to using the Aspire Nautilus 2

Compatibility
The tank is compatible with ‘box mod’ devices such as the Aspire Zelos and Aspire NX30. It simply screws into the top

Size
The Nautilus 2 measures 53 mm high and 22 mm in diameter

Tank capacity
The compact tank holds 2ml of e liquid – the maximum allowed under UK and EU regulations

Finish
The tank is available in two finishes – polished stainless steel or anodised aluminium (black, red and grey) which is durable and less likely to scratch than paint

Enhanced flavour
The airflow structure delivers more flavour as vapour travels significantly less distance through a shorter mouthpiece than before

Durability
The tank has a tough Pyrex® glass tube protected by a metal sleeve. The earlier version featured exposed glass corners and a glass screw thread

Airflow
Airflow affects the amount of vapour, its temperature, the flavour intensity and the ‘pull’ (how hard or softly you draw in breath)

Pinpoint airflow control
The airflow ring features five vents, giving you more control. Adjust airflow to suit your preferences by turning the ring at the base of the tank to open and close the vents.

Vaping styles
There are two styles of vaping - mouth to lung (MTL) and direct to lung (DTL). The Nautilus 2 can support both

Easy to refill
You now fill the tank from the top without removing it from the device or turning upside down. This is much easier and cleaner than base-filling tanks

Coils
A coil (or ‘atomizer’) is the part of your e cigarette inside the tank that heats up the e liquid, producing the vapour that you inhale

Nautilus coils
The tank is compatible with all Nautilus coils (also known as Nautilus BVC coils/atomizers). Nautilus X coils are not compatible

Nautilus coils
The tank comes with a new Nautilus 0.7 ohm (Ω) ‘sub-ohm’ coil pre-installed. This simply means the coil resistance is less than one ohm
Sub-ohm vaping
Sub-ohm coils create more vapour and flavour than higher resistance coils and a more powerful ‘throat hit’ (the sensation you feel when you inhale nicotine)


Nautilus coils
A higher resistance Nautilus coil (1.8 Ω) is also included and fully compatible. Higher resistance coils use less e liquid as they create less vapour with each puff

E liquid strength
Strength is measured in mg/ml of nicotine, ranging from 0 up to 18. We recommend using lower strengths (0 to 6) with the sub-ohm coils

Recommended power range
All coils are marked with their resistance and recommended power range. For 0.7 Ω coils this is 18-23 watts and for 1.8 Ω coils 10-14 watts

Organic cotton
The wick inside the coil is made from Japanese organic cotton which provides a purer, cleaner taste than low quality fibre alternatives
Coil material
The coil wire is made from kanthal and can be used with mod devices in variable wattage (VW), variable voltage (VV) and ‘bypass’ modes - but not temperature control (TC)

Temperature control
The tank can be used on devices with such as the Aspire Zelos in temperature control mode but you will need to buy compatible Ni-200, titanium or stainless steel coils

Temperature control coils
Aspire Triton Mini Ni200 coils (0.15 Ω) are sold separately and compatible with the Nautilus 2 tank for use with a device in temperature control mode


Mouthpieces
Each tank comes with two mouthpieces (also known as ‘drip tips’). One is made from stainless steel and the other is Delrin® - a tough plastic – again to suit your preference

Replacement glass
The kit also includes a spare Pyrex® glass tube for the tank which is easy to change should the original become worn or break

O-rings
O-rings are small silicone seals used to prevent leaks. The Nautilus 2 features dual O-ring protection on both the mouthpiece and the coil and comes with 6 spares

Using the Nautilus 2
All you need to do is connect to your device, fill with e liquid and change the coil when needed

Connect
The tank features a standard 510 thread and simply screws into the top of your device

Filling with e liquid
Simply hold the tank upright and unscrew the metal sleeve. Then add your e liquid before replacing the sleeve
The first time
When you first use your tank or change the coil wait two minutes after filling to allow the e liquid to absorb fully into the coil (called ‘priming the coil’) to prevent damage and unpleasant ‘dry hits’

When to change the coil
You should change the coil when you first see a reduction in vapour. If you don’t you will start to experience less flavour and a burnt taste – change the coil immediately

Changing the coil
Before changing a coil ensure the tank is empty. Unscrew the metal sleeve and pull off the glass tube. Then unscrew the coil and screw in a new one before replacing the glass

Changing the coil
Refill with liquid before screwing the metal sleeve back on. Remember to wait at least 2 minutes to prime the coil again before use

Aspire Nautilus 2 kit contents

Includes the Nautilus 2 tank, two Nautilus BVC coils (0.7 Ω pre-installed and 1.8 Ω), spare Pyrex® glass tube, additional Delrin® mouthpiece, 6 O-rings and user manual

 

Copyright © 2009 - 2017 Smoke Without Sin Ltd